The metal doser is designed for the transfer of a Measured Aluminum Alloy melted metal from the holding furnace to the filling chamber of the die casting machine.
- Phone number: +420571452203
- E-mail: Please login to view this information
- WWW: http://www.lukos.cz
Detailed descriptionMetal dosing - hydraulic
The metal doser is designed for the transfer of a measured aluminium alloy melted metal from the holding furnace to the filling chamber of the die casting machine or to a chill mould of a gravity casting machine. It transfers the melted metalof0.5to7.5kgweight. Continuous movement speed control of a long arm of the ladle with possible straightening of a short arm by 45 degrees provides fast and safe melted metal transfer to the place of filling without a necessity of using filling channels. Simple programming of the position stop and the quantity of a lot is madebythe proportional position monitoring of both arms and a ladle. To increase the operational safety, the machine is equipped with an automatic safety device preventing the arm from unwanted falling during the powerorpressure medium stoppage.
Location: The metal doser can be fixed by means of an anchor plate and screws directly to the die casting machine structure or to the stand which is fixed to the floor with anchoring bolt.
Hydraulic circuit: Hydraulic pressure of the operating fluid is supplied from the machine hydraulic systemor fromaseparate hydraulic unit.
Metal dosing - electric
Contact the supplier of this product Metal dosing